Drilling machine protective cover patent
Comply with (GB/T 16855.1-1997) Class 1 or Class 3 stop requirements; comply with the relevant regulations and requirements of GB5226.1-2002 10.7, and GB 16754; |
Drilling machine protection selection
product name | AG61-CG40 | AG61-CG50 | Security door lock | Safety control system |
Dimensions | A:454 B:450 C:500 D:200 | A:504 B552 C:580 D:220 | √ | √ |
Explanation |
Product technical description
· Control of access to the hazardous area The design and positioning of the protective cover of the movable lathe should be such that it can prevent the protective cover from closing when there are people left in the hazardous area during normal operation. If this is not feasible, other measures should be taken to prevent the detection of persons in the danger zone. See GB/T 15706-2012, 6.3.3.2.3. |
Confirm safety and security through a third-party certification body.
|
Product patent
The design of the drilling machine protective cover should properly consider the operation of the machine for the foreseeable full life cycle and the predictable machine environment Factors, poor consideration can lead to dangerous conditions that hinder the operation of the machine, which in turn leads to the protective cover provided Was artificially abandoned, thereby exposing the operator to greater risks. Foreseeable aspects of existing operating shields All are properly considered in the design stage to ensure that the design and manufacture of the protective cover itself does not create new dangers. |
Drilling machine safety circuit module
SR301 safety relay
Multiple safety product component inputs
ISO 13849-1 Performance Index PLe |
SR 103 safety controller
Performance index e corresponding to EN ISO 13849-1 and safety category 4
|
車床防護裝置· 保護卡盤卷入點傷害· 防碎削飛濺· 安全聯鎖監控防護罩使用狀態· 配置安全控制箱回路· 安裝指示燈方便查看報警狀態· 滿足GB T 8196-2018機械安全防護裝置固定式和活動式防護裝置設計和制造一般要求防護選型產品名稱AG61-CG40AG61-CG50安全......
銑床防護裝置 當銑床防護罩擺動,微動開關上的正極觸電打開發送急停信號給機器;并連接到設備的安全回路;銑床防護罩連鎖安全防護裝置設計符合國家安全標準,結構穩固符合人機及現場,保護第三者的安全;符合EN418標準要求;所有的開關由歐洲分類方法E Exdllc T6,NEMA 4......
鉆床防護罩專利號:2015 2 0657430.0 鉆床運轉過程中,操作區產生飛濺的熾熱碎屑和火花,機器的旋轉部件也會危及人員的安全; 提高鉆床作業過程中的安全性能,避免操作者的雙手直接接觸到高速旋轉的......
一種鉚釘機的智能安全保護系統專利號:2018101420997.0當前市場上使用的鉚釘機沒有任何對操作人員進行保護的防范措施由于生產加工階段高頻率操作,大約每三秒就需要啟動一次鉚釘機,而操作人員需要手動上料,在上料過程中,自己有可能不小心誤啟動設備,造成對手指的損傷,......
Lihong Safety Equipment Engineering (Shanghai) Co., Ltd.
E-Mail: info@lh-safety.com
Address: 581 Xiuchuan Road, Chuansha Town, Pudong New District, Shanghai
(Greenland East Coast International Plaza-Room A 313)
Copyright ? Lihong Safety Equipment Engineering (Shanghai) Co., Ltd.